Détails du paquet a/sg3utils/sg3utils-1.40-x86_64-1 pour 0Linux x86_64
Équipe 0Linux contact@0linux.org
Généré le 07/12/2014
sg3utils 1.40
Informations
- NOM DU PAQUET : sg3utils-1.40-x86_64-1
- TAILLE COMPRESSÉE : 671 Kio
- TAILLE DÉCOMPRESSÉE : 2195 Kio
- sg3utils: Outils pour le protocole SCSI
Installation
0g sg3utils
Ressources
- Sources : Recette 0Linux | Archives sources
Interactions inter-paquets
| Dépendances |
|---|
| Dépendants |
|---|
| opt-abonnement |
| udisks |
Contenu
| Fichiers installés |
|---|
usr/ |
usr/bin/ |
usr/bin/scsi_logging_level |
usr/bin/scsi_mandat |
usr/bin/scsi_readcap |
usr/bin/scsi_ready |
usr/bin/scsi_satl |
usr/bin/scsi_start |
usr/bin/scsi_stop |
usr/bin/scsi_temperature |
usr/bin/sg_compare_and_write |
usr/bin/sg_copy_results |
usr/bin/sg_dd |
usr/bin/sg_decode_sense |
usr/bin/sg_emc_trespass |
usr/bin/sg_format |
usr/bin/sg_get_config |
usr/bin/sg_get_lba_status |
usr/bin/sg_ident |
usr/bin/sg_inq |
usr/bin/sg_logs |
usr/bin/sg_luns |
usr/bin/sg_map |
usr/bin/sg_map26 |
usr/bin/sg_modes |
usr/bin/sg_opcodes |
usr/bin/sg_persist |
usr/bin/sg_prevent |
usr/bin/sg_raw |
usr/bin/sg_rbuf |
usr/bin/sg_rdac |
usr/bin/sg_read |
usr/bin/sg_read_block_limits |
usr/bin/sg_read_buffer |
usr/bin/sg_read_long |
usr/bin/sg_readcap |
usr/bin/sg_reassign |
usr/bin/sg_referrals |
usr/bin/sg_rep_zones |
usr/bin/sg_requests |
usr/bin/sg_reset |
usr/bin/sg_reset_wp |
usr/bin/sg_rmsn |
usr/bin/sg_rtpg |
usr/bin/sg_safte |
usr/bin/sg_sanitize |
usr/bin/sg_sat_identify |
usr/bin/sg_sat_phy_event |
usr/bin/sg_sat_read_gplog |
usr/bin/sg_sat_set_features |
usr/bin/sg_scan |
usr/bin/sg_senddiag |
usr/bin/sg_ses |
usr/bin/sg_ses_microcode |
usr/bin/sg_start |
usr/bin/sg_stpg |
usr/bin/sg_sync |
usr/bin/sg_test_rwbuf |
usr/bin/sg_turs |
usr/bin/sg_unmap |
usr/bin/sg_verify |
usr/bin/sg_vpd |
usr/bin/sg_wr_mode |
usr/bin/sg_write_buffer |
usr/bin/sg_write_long |
usr/bin/sg_write_same |
usr/bin/sg_write_verify |
usr/bin/sg_xcopy |
usr/bin/sginfo |
usr/bin/sgm_dd |
usr/bin/sgp_dd |
usr/doc/ |
usr/doc/sg3_utils → sg3utils |
usr/doc/sg3utils → sg3utils-1.40 |
usr/doc/sg3utils-1.40/ |
usr/doc/sg3utils-1.40/0linux/ |
usr/doc/sg3utils-1.40/0linux/ldd.log |
usr/doc/sg3utils-1.40/0linux/sg3utils-1.40-x86_64-1.dep |
usr/doc/sg3utils-1.40/0linux/sg3utils-1.40.log.xz |
usr/doc/sg3utils-1.40/AUTHORS |
usr/doc/sg3utils-1.40/BSD_LICENSE |
usr/doc/sg3utils-1.40/COPYING |
usr/doc/sg3utils-1.40/ChangeLog |
usr/doc/sg3utils-1.40/INSTALL |
usr/doc/sg3utils-1.40/NEWS |
usr/doc/sg3utils-1.40/README |
usr/doc/sg3utils-1.40/README.freebsd |
usr/doc/sg3utils-1.40/README.iscsi |
usr/doc/sg3utils-1.40/README.sg_start |
usr/doc/sg3utils-1.40/README.solaris |
usr/doc/sg3utils-1.40/README.tru64 |
usr/doc/sg3utils-1.40/README.win32 |
usr/doc/sg3utils-1.40/TODO |
usr/doc/sg3utils-1.40/compile |
usr/include/ |
usr/include/scsi/ |
usr/include/scsi/sg_cmds.h |
usr/include/scsi/sg_cmds_basic.h |
usr/include/scsi/sg_cmds_extra.h |
usr/include/scsi/sg_cmds_mmc.h |
usr/include/scsi/sg_io_linux.h |
usr/include/scsi/sg_lib.h |
usr/include/scsi/sg_lib_data.h |
usr/include/scsi/sg_linux_inc.h |
usr/include/scsi/sg_pt.h |
usr/lib64/ |
usr/lib64/libsgutils2.a |
usr/lib64/libsgutils2.la |
usr/lib64/libsgutils2.so → libsgutils2.so.2.0.0 |
usr/lib64/libsgutils2.so.2 → libsgutils2.so.2.0.0 |
usr/lib64/libsgutils2.so.2.0.0 |
usr/man/ |
usr/man/man8/ |
usr/man/man8/rescan-scsi-bus.sh.8.xz |
usr/man/man8/scsi_logging_level.8.xz |
usr/man/man8/scsi_mandat.8.xz |
usr/man/man8/scsi_readcap.8.xz |
usr/man/man8/scsi_ready.8.xz |
usr/man/man8/scsi_satl.8.xz |
usr/man/man8/scsi_start.8.xz |
usr/man/man8/scsi_stop.8.xz |
usr/man/man8/scsi_temperature.8.xz |
usr/man/man8/sg3_utils.8.xz |
usr/man/man8/sg_compare_and_write.8.xz |
usr/man/man8/sg_copy_results.8.xz |
usr/man/man8/sg_dd.8.xz |
usr/man/man8/sg_decode_sense.8.xz |
usr/man/man8/sg_emc_trespass.8.xz |
usr/man/man8/sg_format.8.xz |
usr/man/man8/sg_get_config.8.xz |
usr/man/man8/sg_get_lba_status.8.xz |
usr/man/man8/sg_ident.8.xz |
usr/man/man8/sg_inq.8.xz |
usr/man/man8/sg_logs.8.xz |
usr/man/man8/sg_luns.8.xz |
usr/man/man8/sg_map.8.xz |
usr/man/man8/sg_map26.8.xz |
usr/man/man8/sg_modes.8.xz |
usr/man/man8/sg_opcodes.8.xz |
usr/man/man8/sg_persist.8.xz |
usr/man/man8/sg_prevent.8.xz |
usr/man/man8/sg_raw.8.xz |
usr/man/man8/sg_rbuf.8.xz |
usr/man/man8/sg_rdac.8.xz |
usr/man/man8/sg_read.8.xz |
usr/man/man8/sg_read_block_limits.8.xz |
usr/man/man8/sg_read_buffer.8.xz |
usr/man/man8/sg_read_long.8.xz |
usr/man/man8/sg_readcap.8.xz |
usr/man/man8/sg_reassign.8.xz |
usr/man/man8/sg_referrals.8.xz |
usr/man/man8/sg_rep_zones.8.xz |
usr/man/man8/sg_requests.8.xz |
usr/man/man8/sg_reset.8.xz |
usr/man/man8/sg_reset_wp.8.xz |
usr/man/man8/sg_rmsn.8.xz |
usr/man/man8/sg_rtpg.8.xz |
usr/man/man8/sg_safte.8.xz |
usr/man/man8/sg_sanitize.8.xz |
usr/man/man8/sg_sat_identify.8.xz |
usr/man/man8/sg_sat_phy_event.8.xz |
usr/man/man8/sg_sat_read_gplog.8.xz |
usr/man/man8/sg_sat_set_features.8.xz |
usr/man/man8/sg_scan.8.xz |
usr/man/man8/sg_senddiag.8.xz |
usr/man/man8/sg_ses.8.xz |
usr/man/man8/sg_ses_microcode.8.xz |
usr/man/man8/sg_start.8.xz |
usr/man/man8/sg_stpg.8.xz |
usr/man/man8/sg_sync.8.xz |
usr/man/man8/sg_test_rwbuf.8.xz |
usr/man/man8/sg_turs.8.xz |
usr/man/man8/sg_unmap.8.xz |
usr/man/man8/sg_verify.8.xz |
usr/man/man8/sg_vpd.8.xz |
usr/man/man8/sg_wr_mode.8.xz |
usr/man/man8/sg_write_buffer.8.xz |
usr/man/man8/sg_write_long.8.xz |
usr/man/man8/sg_write_same.8.xz |
usr/man/man8/sg_write_verify.8.xz |
usr/man/man8/sg_xcopy.8.xz |
usr/man/man8/sginfo.8.xz |
usr/man/man8/sgm_dd.8.xz |
usr/man/man8/sgp_dd.8.xz |